Promise Technology FASTTRAK SX4300 - Manual (Page 12)

FastTrak SX4300, SX8300 User Manual
6
Installing the FastTrak Card
The FastTrak RAID Controller card fits into any available 3.3-volt PCI-X slot. You
cannot plug the FastTrak card into a 5-volt PCI slot.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-X slot on the motherboard.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Note
The FastTrak SX4300 and SX8300 RAID Controller cards are PCI
Plug-n-Play (PnP) devices. No changes are necessary in the
motherboard CMOS/BIOS Setup for resources or drive types in
most applications.