Install driver in an existing system – Promise Technology FASTTRAK SX4300 User Manual
Page 40
Advertising
FastTrak SX4300, SX8300 User Manual
34
3.
When the boot: prompt appears on the bottom of the screen, type
acpi=oldboot into the lower input box.
4.
Press the left Alt key and insert the FastTrak driver diskette into the floppy
drive.
5.
Finish the installation normally.
Install Driver in an Existing System
1.
Insert the FastTrak driver diskette into the floppy drive.
2.
Type the following commands:
# mount /dev/fd0 /media /floppy
# cd /media /floppy
# ./install
# insmod FastTrak
# umount /media /floppy
3.
Remove the FastTrak driver diskette from the floppy drive.
Advertising
This manual is related to the following products: