PYLE Audio PDCD940MP - Manual (Page 3)

- 2 -
NOTE ON USE
BE CAREFUL OF HIGH TEMPERA-
TURE
TO AVOID DUST & MOISTURE TO AVOID PLACING ON UN-
STABLE LOCATION
DO NOT USE CHEMICALS
IF OUT OF WORK, CONTACT
SALES AGENCY IMMEDIATELY
KEEP AWAY FROM TV &
MAGNETISM
DO NOT OPEN THE CASE CARE WITH THE POWER CORD
This product shall not be treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
For Safe and Efficient Operation
• Select the installation location of your unit carefully.
Avoid placing it in direct sunlight. Also avoid locations
subject to vibration and excessive dust, heat, cold or
moisture. Keep away from sources of hum such as
transformers or motors.
The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
The MAINS plug is used as the disconnected device, the
disconnect device shall remain readily operable.
WARNING: The user shall not place this apparatus in
the confined area during he operation so that the
mains switch can be easily accessible.
• Do not use this compact disc player where there are
extremes in temperature ( below 41 o F/5 o C or
exceeding 95 o F/35 o C )
• Do not open the cabinet as this might result in
damage to the set or electrical shock.
SAFETY CERTIFICATION
Laser Diode Properties
Material: Ga.-Al-As
Wavelength: 755-815 nm (25
o C)
Laser Output: Continuous Wave max. 0.5mW
• Be sure your hands are clean when handing discs.
Never insert a disc which has a crack on its surface.
• When disconnecting the power cord form the AC
outlet, always grasp it by the plug. Never pull the cord.
• Do not use force when operating the switches and
buttons.
• Before moving the set, be sure to disconnect the
power cord and all connecting cables.
• To keep the laser pickup clean, do not forget to close
the disc tray.
• Do not attempt to clean the unit with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
• Keep this manual in a safe place for future reference.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATIO EXPOSURE.
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT RE-
MOVE COVER (OR BOTTOM SCREWS). NO USER
SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICING PER- SONNEL.
DESCRIPTION OF THE FUNCTIONS
Function of the Main Unit :