Planet Technology GSD-800 - Manual (Page 12)

11
B. Connect the other end of the cable to the network devices
such as printer servers, workstations or routers…etc.
Note
Connection to the Switch requires UTP Category 5
network cabling with RJ-45 tips. For more information,
please see the Cabling Specification in Appendix A.
Step 5: Supply power to the Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the 100-240V AC power cord to a standard wall
outlet.
When the Switch receives power, the Power LED should remain solid
Green.