Panasonic Ceiling Mount Bracket ET-PKD77H - Manual

Attachment plate
Ø60.5
271 298
340–420*
345
100
100
300
200
200 344
344
440
Attachment plate
Projector
Adjustable in
40 mm (1-9/16˝)
steps
Ø2-3/8˝
11-23/32˝ 7-9/32˝
13-3/8˝–16-17/32*
13-19/32˝
3-15/16˝
3-15/16˝
11-13/16˝
7-7/8˝
7-7/8˝
13-17/32˝
13-17/32˝
17-5/16˝
S
P E C
F
I L E
ET-PKD77H
Ceiling mount bracket for high ceilings
As of September 2006 < 1 >
Specifications
Vertical correction angle: +5°, -17°
Horizontal slant correction angle: ±2.5°
Horizontal turn correction angle: ±1.2°
Dimensions (W x H x D): 344 x 340– 420 x 345 mm
(13-17/32˝ x 13-3/8˝–16-17/32˝ x 13-19/32˝)
Weight: 9.7 kg (21.4 lbs)
Attachment plate Illustration shows the ET-PKD77H attached to the projector.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 1 . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 2 . . . . . . . . . . . . . . . . . . . . 1
Pole fixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer-fitted hexagonal bolts (M6 x 80) . . . . . . 2
Washer-fitted screws for safety fitting (M4 x 8) . . 4
Washer-fitted hexagonal bolts (M6 x 12) . . . . . 35
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 2
Wire rope (SU304, Ø1.5 mm, 2 m) . . . . . . . . . . . 2
Wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sealing packing . . . . . . . . . . . . . . . . . . . . . . . . . 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling.
C a u t i o n :
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.