Maintenance, Engine oil – Polaris Scrambler 4X4 International User Manual

Page 55

Advertising
background image

52

MAINTENANCE

Engine Oil

Oil Recommendations

Always change the oil filter whenever changing oil.
Polaris recommends the use of Polaris PS-4 PLUS Performance Syn-

thetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to

be changed more frequently if Polaris oil is not used. Always use 2W-50

oil. Follow the manufacturer's recommendations for ambient tempera-

ture operation. See page 99 for the part numbers of Polaris products.

Mixing brands or using a non-recommended oil may cause serious engine

damage. Always use the recommended oil. Never substitute or mix oil brands.

Oil Specifications

Oil Level

The oil dipstick is located on the left

side of the vehicle.
1. Position the vehicle on a level

surface. Place the transmission in

neutral. Lock the parking brake.

2. Start the engine. Allow it to idle

for 30 seconds. Stop the engine.

3. Remove the dipstick. Wipe it dry

with a clean cloth.

4. Reinstall the dipstick completely.

Make sure the cap is fully seated

to keep the angle and depth of the

stick consistent.

5. Remove the dipstick and check

the oil level. Add oil as needed.

Maintain the oil level in the safe

range. Do not overfill.

6. Reinstall the dipstick.

Lubricant

Capacity

Drain Plug Torque

PS-4 PLUS Performance

Synthetic 2W-50 4-Cycle Oil

2 qts. (1.9 l)

14-17 ft. lbs. (19-23 Nm)

Safe

Add Oil

{

Safe Range

Advertising
This manual is related to the following products: