Paradyne 3166 CSU - Manual (Page 51)

SDCP Operation
3-25 3166-A2-GB20-10 November 1998
5. Select Mgmt.
F1
Edit:
User
Alarm Mgmt
F2 F3
6. From the Mgmt Config screen, select Gen.
F1
Mgmt Config:
Gen
Trap
F2 F3
7. Press F1 (Next) until the CommunityName1 configuration option appears.
8. Press F2 (Edit) to edit the community name.
F1
CommunityName1:
Next
Edit Clear
F2 F3
NOTE:
Steps 9 and 10 describe the process for entering text strings for Mgmt
configuration options. This process applies to entering any text strings
into Mgmt configuration options.
9. Use the and keys to position the cursor under the character you want
to change. Press F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
F1
public
Up
Down Save
F2 F3
The F1 (Up) key scrolls through the ASCII character set in the following
order: numbers (0 –9), lowercase letters (a–z), uppercase letters (A–Z),
space character, ASCII symbols (ascending order, based on ASCII code),
and the End of Line symbol (
←
). The
←
erases all characters to the right of
the cursor.
10. When you are through changing the community name, you must press F3
(Save) to save the value. Otherwise, the original value will be retained.
11. Press F1 (Next) until the Access 1 configuration option appears.