Python 625 - Manual (Page 25)

21
© 1999 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
Arming
■ Press of your transmitter for one second. When the system arms, you
will hear a short chirp, and the parking lights will flash once. If the vehi-
cle’s power door locks are controlled by the system, the doors will lock.
Arming While Driving
■ Press on your transmitter while the vehicle is running. The system will
chirp once and then once more to indicate that the ignition is on.
Disarming
■ Press . You will hear two chirps, and the parking lights will flash twice.
If power locks are controlled by the system, the doors will unlock.
Disarming Without a Transmitter
■ Turn on the ignition. Press the Valet switch within 15 seconds. The sys-
tem should now disarm. If it does not, you may have waited too long; turn
the ignition off and on and try again.
Silent Mode ™
■ Press briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only.
Panic Mode
■ Press for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds.
To enter or exit Valet ® Mode with the Valet switch
■ Turn ignition to "run" position, then turn to "off" position. Press and
release the Valet switch within 10 seconds. The Status LED will light
steady if you have entered Valet Mode, and it will go out if you exited
Valet Mode.
Using Remote Valet ® as you enter or exit the vehicle:
■ Open any door. Press . Press . Press again. The Status LED will
light steady if you have entered Valet Mode, and it will go out if you exit-
ed Valet Mode.
Cut along dotted line and f
old f
o
r a quick and eas
y r
efer
ence to k
eep in y
our pur
se or w
allet.
✂✂
✂ ✂