Philips 32PT91S1 - Manual (Page 5)

5
Audio/Video Jack Panel allows direct connections with VCRs, DVDs, or
other devices, providing quality TV picture and sound playback.
Audio Volume Leveler (AVL) Control keeps the TV sound at an even
level. Peaks and valleys that occur during program changes or commercial
breaks are reduced, making for a more consistent, comfortable sound.
AutoLock™ allows you to block the viewing of certain channels or pro-
grams with certain ratings if you do not want your children to view inap-
propriate materials.
Auto Programming scans (when activated) for all available channels
from regular antenna or cable signals and stores only active broadcast sta-
tions in the TV’s memory.
AutoPicture™ allows you to change the picture settings (color, tint, con-
trast, etc.) for various types of programming, such as sports, movies, multi-
media (games), or weak signals with the push of one button.
AutoSound™ allows you to select from three factory-set controls and a
personal control that you set according to your own preferences through
the onscreen Sound menu. The three factory-set controls (Voice, Music,
and Theatre) enable you to tailor the TV sound so as to enhance the partic-
ular programming you are watching.
Channel Edit allows you to add or delete channels from the list stored in
the TV’s memory. Channel Edit makes it easy to limit or expand the num-
ber of channels that are available to you when you press the Channel (+) or
(–) buttons on your remote control.
Closed Captioning allows the viewer to read TV program dialogue or
voice conversations as onscreen text.
Gemstar Guide Plus+
® gives the user a listing of current programming
right on the TV screen. Can be used to set recordings of certain programs,
get up to date news bulletins, and much more.
ImageMax™ helps you sharpen the picture quality by making dark por-
tions of the picture darker and light portions brighter.
Infrared Remote Control works your TV and other remote-controlled
devices, such as VCRs, DVD players, cable converters, and satellite
receivers.
Infrared Remote (IR) Blaster works with the M-Link feature to enable
your TV to “learn” the remote-control commands of new Philips devices
or multibrand devices that you have connected to your TV. After the com-
mands are learned, you can use your TV remote control to operate and
control all of the devices.
M-Link™ allows you to convert your TV into a home-cinema control
center composed of up to six devices (including an audio amplifier). You
activate the devices by pressing macro buttons and control the devices by
pressing “hot” buttons on your remote control. Choose from cable box,
digital set top box, DVD (digital video disc), laser disc (LD), satellite digi-
tal TV, VCD (video compact disc), and VCR (video cassette recorder)
devices. (IR Blaster must be plugged in before turning the TV ON.)
Onscreen Menu shows helpful messages and instructions for setting TV
feature controls (can be viewed in English, French, or Spanish).
Sleep Timer automatically turns the TV OFF after a set amount of time
that you choose.
Standard Broadcast (VHF/UHF) or Cable TV (CATV) channel capabil-
ity allows for viewing by antenna or cable.
Stereo capability, including a built-in audio amplifier and twin-speaker
system, allows for the reception of TV programs broadcast in stereo sound.
Surf Button allows you to easily switch among only the channels that are
of interest to you (the ones that you have programmed into the TV’s Surf
control through the onscreen menu).
Timer allows you to set your TV to turn itself ON and OFF once or daily
like an alarm clock.
Use the simple Quick Use and Installation
Guide (supplied with your TV information
packet) for details on:
• Cable/Antenna
Hookups
• Automatic Channel
Programming
• Channel Editing
• Basic Operation of the TV and Remote
Control
• Selection of the Onscreen Menu Language
Q
UICK
U
SE AND
I
NSTALLATION
G
UIDE
Q UICK U SE AND I NSTALLATION G UIDE
T ABLE OF C ONTENTS
Getting Started Warning/Precautions ..................................1
Hooking Up Your TV.................................1
Basic TV and Remote Control Operation .................2
How to Use the “INSTALL” Controls ..................3-4
Using the Language Control......................................3
Setting the TV to Auto Program Channels................3
Setting the TV for a Cable or Antenna Signal...........3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron control............................4
12 1 2 3 4 5 6 7 8 9 10 11 • For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them
handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
Color Television and Remote Control
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
Y our TV has two sepa-
rate ANT(enna)/Cable
inputs on the rear of the
set. These two signal inputs
offer convenient hook-up
options for both normal TV
program viewing and
Picture-In-Picture (PIP)
features.
The ANT(enna) A input is
intended for use and view-
ing on the TV’s main
screen. Your home’s prima-
ry Antenna, or Cable TV
signal, should be connect-
ed to this input for normal
TV setup, use and feature
operation.
A NTENNA OR C ABLE TV
A NT ( ENNA ) A & B I NPUTS Remember,
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "TUNER"
section on page 3 of
this Guide.)
Your TV can set
itself to select only
the channel numbers
on your Cable sys-
tem (see “Auto
Program" page 3). If
you use a Cable
Converter box, set
the TV to the same
channel as the con-
verter's CH 3/4
switch (on the rear of
the converter.)
To order accessories h th li t d
S MART H ELP A typical ANT(enna) A and PIP ANT B connection
(using a common signal source
and an optional Signal Splitter):
If your Antenna or Cable TV
signal has a round cable con-
nector (75 ohm) on the end,
then you're ready to connect it
to the 75ohm Signal Splitter.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter before connecting
to the 75ohm Signal Splitter. Connect your Antenna or Cable TV signal to the single
75 ohm input plug on the two-
way Signal Splitter (optional).
Then connect two lengths of RF
Coaxial Cable to the two Output
plugs on the two-way Signal
Splitter (F-type connector on
both ends).
300 to 75 Ω Adapter
Twin Lead Wire
Back of TV
BEGIN
Round Cable
- Outdoor or Indoor Antenna - receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF).
OR
Connect the twin Output plugs on the Signal Splitter to
the ANT A and PIP ANT B
inputs on the rear of the TV.
Push the round connector end of
the RF Coaxial Cable onto the
ANT(enna) plug and screw it
down tight (if using threaded
cables).
Combination VHF/UHF Antenna
F
EATURES
Use the simple M-Link Instructions for Use
(supplied with your TV information packet)
for details on:
• Operating Accessory
Devices (VCR, DVD, Cable
Box, and Others)
• Automatic Programming Via
the TV Remote Control
• Setting Up Personal
Commands
• Inputting Commands from the Remote
Controls of Your Accessory Devices
M-L
INK
I
NSTRUCTIONS FOR
U
SE
Instructions for use
3135 015 XXXXX
Use the simple Guide Plus+ ® Guide (sup-
plied with your TV information packet) for
details on:
• Television Program
Listings
• Setting the TV to
Watch a certain Broadcast when it’s
Programmed to Air.
• Set a VCR Plus+ ® Recording
• Receive Current Information Regarding
Upcoming Shows,Specials and News
• Sort by Movies, Sporting Events or
Children’s Programming
G
EMSTAR
G
UIDE
P
LUS
+ ® G
UIDE
Getting Started ✔ Welcome to GUIDE Plus+™ GOLD . . . . . . . . . . . . . . .1 ✔ Removal of the Demo Pin . . . . . . . . . . . . . . . . . . . . . . .1 ✔ Hooking up the IR Blaster Cables . . . . . . . . . . . . . . . . .1 ✔ Using the GUIDE Plus+™ GOLD Remote Buttons . . . .2 ✔ Using the GUIDE Plus+™ GOLD First Time Setup . . .3 ✔ Using the GUIDE Plus+™ GOLD Demo and Options Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ✔ Understanding the GUIDE Plus+™ GOLD Information Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ✔ Learn How to Sort Movies, Sporting Events and Children’s Programming . . . . . . . . . . . . . . . . . . . . .5 ✔ Using the News Guide Feature . . . . . . . . . . . . . . . . . . . .6 ✔ Using the Schedule Feature . . . . . . . . . . . . . . . . . . . . . .7 ✔ Learn How to Watch or Record Programs . . . . . . . . . . .7 ✔ Using the Message Feature . . . . . . . . . . . . . . . . . . . . . .8 ✔ Using the Channel Editor . . . . . . . . . . . . . . . . . . . . . . . .8
GEMSTAR IS NOT IN ANY WAY LIABLE FOR THE
ACCURACY OF THE PROGRAM SCHEDULE INFOR-
MATION PROVIDED BY THE GUIDE PLUS+ SYSTEM.
IN NO EVENT SHALL GEMSTAR BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS
OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSE-
QUENTIAL DAMAGES IN CONNECTION WITH THE
PROVISION OR USE OR ANY INFORMATION, EQUIP-
MENT, OR SERVICES RELATING TO THE GUIDE
PLUS+ SYSTEM.
VCR Plus+, C3, PlusCode and GUIDE Plus+™ GOLD are
trademarks of Gemstar Development Corporation.
The VCR Plus+ and GUIDE Plus+ systems are manufac-
tured under license from Gemstar Development Corporation
and VCR Index Systems B. V., respectively.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
A VCR is required for VCR Plus+ operation.
Quick Use and Setup Guide
Y our GUIDE Plus+™ GOLD
system is an electronic listing
of current and future programs
available for your television
viewing. The GUIDE Plus+™
GOLD system is designed to pro-
vide an onscreen interactive pro-
gram guide for you the TV view-
er. GUIDE Plus+™ GOLD
information is received automati-
cally by your TV through your
Antenna or Cable TV system
connections. Once you have
completed the First Time GUIDE
Plus+™ GOLD Setup procedure
daily updates to the GUIDE
Plus+™ GOLD program data
and schedules will take place.
G UIDE P LUS
W ELCOME Note: The
GUIDE Plus+™
GOLD system is
designed to operate
in the USA and
Canada. TV GUIDE
Plus+™ GOLD is
compatible with all
NTSC over-the-air
broadcast system,
most analog cable
broadcast systems,
and many VCR and
Cable Converter Box
models. All displays
and information con-
tained in the GUIDE
Plus+™ GOLD sys-
tem are in English.
S MART H ELP Your new Philips TV must be turned off (typically
overnight) in order to receive the
most recent and accurate GUIDE
Plus+ GOLD program informa-
tion.
Also, if the supplied “IR (Infra
Red) BLASTER” connections
between your TV and accessory
VCR/Cable Converters are com-
pleted you can even program
VCR timer recordings for select
TV shows through the use of the
GUIDE Plus+™ GOLD Menu
screen. The GUIDE Plus+ system can provide a variety of televi-
sion program information:
• channel
• program title
• date
• start time
• program duration
• brief and detailed description
of programs • theme of program (movie, sports, etc.) • indication of closed caption, stereo, and information on
demand (IoD)
The basic signal and setup information you will need
to use the GUIDE Plus+ GOLD
system for the first time are:
• Over-the-air Antenna, or
Cable TV system reception • Local ZIP code/Postal code number • Working Cable Converter Box, if applicable • Working VCR, if applicable
BEGIN
Martha Stewart Port Charles Martha Stewart Young & Restless Real TV The 700 Club Instructional T... Maggie Sweet Paid Program...
Grid displays show listings by channel and time.
Scroll down to use, right to Sort. WTNZ [3] 12:00pm (1hr) cc Grid Sort News Schedule
Watch Record
i
Tue 12:30pm 1:00pm Paid Program... All My Children... Paid Program Days of Our L... Paid Program... Instructional T... Big Valley
Last Channel abc FOX FOX CBS
PBS HSN
12:00
Promotional Panel
Promotional Panel
Video Window
®