ProMaster 300C - Manual (Page 2)

Safety Precautions
1. Before using the flash, make sure that your lighting
equipment is plugged into a 110 volt AC power source. Do
not use any power supply other than the AC specification
indicated on your equipment.
2. Do not expose the equipment to sunlight, moisture, dust,
dirt, rain or water.
3. Any exposure to chemical solutions, gasoline, grease, oil,
paint, or detergents can result in permanent damage to
your equipment.
4. Do not insert any metal objects into your lighting
equipment.
5. Do not touch or handle equipment with wet hands or allow
your equipment to be in contact with water.
6. Do not keep the power on when the light is not in use.
7. Do not attempt to repair your lighting equipment yourself. If
a problem arises, contact the store from which you
purchased the light.
8. If the audible flash ready signal buzzes for a long period of
time or there is no response from your flash, please
disconnect your flash from the power supply and
reconnect.
Specifications:
Power Supply:
AC100
130volt 50/60Hz
Strobe output: 300WS
Guide No. (ISO100): 54m
Cooling Fan: Built-in Mini Fan Cooler
Power Setting: 1/32 to 1/1 continuously
Recycle Time: 0.5–2.5s
Flash Duration: 1/1500–1/800s
Recycle Indication: Ready Light & Audio Signal &
Modeling Lamp
Flash Beam Width: Over 55 Degree
Slave Sensitivity: Over 33ft. Radius,360 Degree
Modeling Lamp: Diffused Halogen Quartz 150W/E27
Color Temperature: 5600K
Synch Cord Voltage: 6VDC
Triggering:
Synch Cord, Test Button & Slave Sensor
Fuse: 10A
Housing Size:
136mm
127mm
320mm
Body Weight: 2.2kg