Accessories, English, Do not use the old lamp unit – Panasonic PT-D7700E User Manual

Page 7: Electric shocks can result if this is not done

Advertising
background image

7

ENGLISH

Accessories

Check that all of the accessories shown below have been included with your projector.

Do not look into the lens while the projector is being used.

• Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not bring your hands or other objects close to the air outlet port.

• Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat.

Do not use the old lamp unit.

• The lamp section may break.

Replacement of the lamp unit should only be carried out after it has completely cooled
off, otherwise burns may result.

Disconnect the power cord plug from the wall outlet as a safety precaution before
carrying out any cleaning.

• Electric shocks can result if this is not done.

Ask an Authorized Service Centre to clean inside the projector at least once a year.

• If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with

operation.

• It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your

nearest Authorized Service Centre to clean the projector when required. Please discuss with the Authorized

Service Centre regarding cleaning costs.

Do not reach for the openings beside the optical lens, during horizontal or vertical
movements of the lens there is a injury hazard.

To keep our environment clean, please bring the non repairable unit your Dealer or a
Recycling Company.

Remote control:
[N2QAGB000024 x 1]

POWER

ON

OFF

RGB

1

RGB

2

AUX

MENU

STD

LENS

OSD

1

4

7

2

5

8

3

6

9

0

NEXT

USER

LIGHT

ID ALL

ASPECT

ID SET

Projector

Computer

Numetric

BRIGHT

CONTRAST

ON SCREEN

SYSTEM

SEL

FUNC

1

D.ZOOM

ENTER

PAGE

UP

PAGE

DOWN

VIDEO

SHUT

S-

VIDEO

FREEZE

SHUTTER

AUTO

SETUP

LASER ON/OFF

Power cord:

Wired cable for remote
control:
[15m, K1EA03NA0001 x 1]

Dry batteries for remote
control (AA):

for U.K.
[K2CT3FZ00003 x 1]

for Continental
[K2CM3FZ00003 x 1]

Advertising