Polycom DOC2560A - Manual (Page 156)

Chapter 3-Basic Operation
3-78
2 In the drop-down menu select Cut Participant.
Paste Participant
The Paste command connects the copied or cut participant to the selected
conference.
If the participant was copied, he/she should be deleted from the
conference he/she was copied from, unless it is required that the
participant is connected to two (or more) conferences. (There are
endpoints that permit a participant to be connected to multiple
conferences).
To paste a participant:
1
In the Conferences List pane, click the conference you want to paste the
copied/cut participant into.
2 Right-click in the Participants List pane of the selected conference and
in the drop-down menu select Paste Participant.
or
If you are using the RMX Manager and you want to paste the
participant to a conference to different RMX:
a
In the MCUs list pane, click the RMX that is hosting the
conference that is to receive the participant.
b In the Conferences list pane, click the conference you want to
paste the copied/cut participant into.