Peavey LT Series - Manual (Page 20)

p. 18
LT / ST owner’s manual
connections 5
inputs
LT / ST amplifiers are configured standard with pin 2 hot on XLR inputs.
outputs
Speakers are connected using the high-current five-way binding posts
or speakon connectors, or both.
see— operation modes
Very high current is
available at the outputs.
Please connect your
output cable to the + and
- terminals of each sec-
tion precisely as shown.
a
stereo/parallel
female XLR
bridged mono
TRS pinouts 3-pin Phoenix (view of connector on rear of amp)
Com In + In -
Speaker + to PIN 1+
Speaker - to PIN 1- Speaker + to PIN 1+
Speaker - to PIN 2+