POSIFLEX Business Machines PP2000 - Manual (Page 11)

PP2000 (E) User’s Manual 3 - 3
of store stamp. When the printing ink of the stamp is not enough, you
can drip printing ink into the two holes in the rear of the stamp case.
D. RIBBON
INSTALLATION / REPLACEMENT
When replacing the ribbon, please take the handle at the center of
the old ribbon case and lift it up. Then the old ribbon can be taken out.
When installing a new ribbon, please place the new ribbon to a
suitable position and align the axle hole under the ribbon case to the
driving axletree of the printer. Then push down the ribbon case. Now
Location of
the ribbon
Handle of
the ribbon
Knob of
the ribbon