Pioneer DVD-114 - Manual (Page 10)

DVD-114 Operating Instructions
- 7 -
7) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable from the following chart:
Pin Name Function
1 L Left channel audio output
2 G Ground
3 G Ground
4 R Right channel audio output
8) Device Configuration Jumper
set this jumper switch to select the drive use mode supporting the computer
(jumpered = ON; no jumper = OFF)
Pin Name Function
1 MA* 1 on Drive set to Master mode
2 SL on Drive set to Slave mode
3 CS on Drive set to Cable Select mode
4 Reserved
5 Reserved
9) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
10) DC Input
power supply input for DC +5 V and +12 V
Pin Name Function
1 +12 Power supply input for DC +12 V
2 G Ground
3 G Ground
4 +5 Power supply input for DC +5 V
4.3 Region Code Information
The maximum number of times the Region Code may be changed is five (5),
including the initial setting. The fifth change becomes PERMANENT.
Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD
discs are optional. DVD discs with no specified Region Code may be played on any
player.