Push stick – Porter-Cable 33-402 User Manual
Page 23
Advertising
23
PUSH STICK
Make fr
om 1/2
″
OR
3/4
″
WOOD
or thickness less than
width of material to be cut.
Cut her
e to push
1/4
″
wood.
Cut her
e to push
1/2
″
wood.
Notch to
help pr
event
hand fr
om slipping
1/2
″
Squar
es
CONSTRUCTING A PUSH STICK
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could easily be
made from scrap material by following the pattern shown in Fig. 58.
Fig. 58
Advertising