Adjusting equalizer curves 12, Fine-adjusting equalizer curve 12, Adjusting loudness 12 – Pioneer DEH-2700 User Manual

Page 12: Adjusting loudness, Audio adjustments, Adjusting equalizer curves, Fine-adjusting equalizer curve

Advertising
background image

! CUSTOM is an adjusted equalizer curve

that you create.

! When EQ FLAT is selected no supplement

or correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

SPR-BASSPOWERFULNATURAL

VOCALCUSTOMEQ FLAT

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

! If you make adjustments when a curve

other than CUSTOM is selected, the newly

adjusted curve will replace the previous

curve. Then a new curve with CUSTOM ap-

pears on the display while selecting the

equalizer curve.

1 Press AUDIO to select EQ.

2 Press c or d to select the equalizer

band to adjust.

EQ-L (low)EQ-M (mid)EQ-H (high)

3 Press a or b to adjust the level of the

equalizer band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

! If you make adjustments when a curve

other than CUSTOM is selected, the newly

adjusted curve will replace the previous

curve. Then a new curve with CUSTOM ap-

pears on the display while selecting the

equalizer curve.

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80 Q 1W) appears

in the display.

2 Press AUDIO to select the desired band

for adjustment.

LowMidHigh

3 Press c or d to select the desired fre-

quency.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press a or b to select the desired Q fac-

tor.

2N1N1W2W

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Audio Adjustments

En

12

Section

06

Advertising