Panasonic PT-56LCX16 - Manual (Page 35)

35
Basic Operation
Press SAP to select the next audio
track (if available) when receiving a
digital channel.
Digital mode
Select Audio Mode for TV Viewing
Audio track 1 of 1
(English)
Analog mode
Press SAP button to select the
desired audio mode as described
below.
(Arrow shows selection.)
• Each press of SAP button will change
the audio mode as shown below.
• “SAP” is selected with first press of SAP
button.
Stereo
SAP
Mono
Stereo
SAP
Mono
Sleep Timer Feature
Press SLEEP repeatedly to select
the desired time.
• To cancel, press SLEEP repeatedly
until 0 appears. Also, turning Power
OFF while setting SLEEP will reset to
zero.
0
30
60
90
Switches the unit OFF in a preset amount of time from 0
to 90 minutes in 30 minute intervals.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program (sub
language) broadcasts are both being received
simultaneously. Select the Stereo or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select Stereo audio mode.
• If stereo broadcast is weak and the display flickers, select
Mono audio mode for possibly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
Mono broadcast
Normal monaural sound broadcast.
Receivable Broadcast Types
The following are possible broadcast types with their
accompanying on-screen displays. The signal being
received is indicated with a red text while the selected
audio mode is yellow background.
Notes:
• Pressing RECALL with sleep timer set displays remaining
time. This can also be done by pressing SLEEP. If you
continue to press SLEEP, the sleep time setting mode will be
entered.
• Sleep time may also be set from the Menu screen. (p. 42).
• The on-screen display will flash 3, 2 and 1 to indicate the last
three (3) remaining minutes prior to turn off.