Recalling equalizer curves 27, Adjusting equalizer curves 27, Fine-adjusting equalizer curve 27 – Pioneer DEH-30MP User Manual

Page 27: Audio adjustments, Recalling equalizer curves, Adjusting equalizer curves, Fine-adjusting equalizer curve

Advertising
background image

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

SPR-BASS

Super bass

POWERFUL Powerful

NATURAL

Natural

VOCAL

Vocal

CUSTOM

Custom

EQ FLAT

Flat

! CUSTOM is an adjusted equalizer curve

that you create.

! When EQ FLAT is selected no supplement

or correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

SPR-BASSPOWERFULNATURAL

VOCALCUSTOMEQ FLAT

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

1 Press AUDIO to select EQ.

Press AUDIO until EQ appears in the display.

2 Press c or d to select the equalizer

band to adjust.

Each press of c or d selects equalizer bands

in the following order:

EQ-L (low)EQ-M (mid)EQ-H (high)

3 Press a or b to adjust the level of the

equalizer band.

Each press of a or b increases or decreases

the level of the equalization band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Note

If you make adjustments, CUSTOM curve is up-
dated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2 Press AUDIO to select the band for ad-

justment from among low, mid and high.

Press AUDIO repeatedly to switch between

the following functions:

LowMidHigh

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

Audio Adjustments

En

27

English

Section

08

Advertising