Panasonic WS-AT250 - Manual (Page 8)

-8-
SETTING THE SUBWOOFER PROCESSOR
PROTECTION CIRCUITS FOR WS-AT200
SYSTEM DIAGRAM
Audio
Mixer
WS-SP2A
Subwoofer
Processor
In A
In B
Amplifier
Amplifier
Amplifier
150W
150W
400W
BTL
400W
BTL
WS-AT200
WS-AT250
The WS-AT200 has separate overload protection cir-
cuits for woofer and tweeter. When activated by an
excessive input signal, they mute the output sound.
Turn down the volume control for 2 to 20 seconds to
reset the circuits.
A B VLFI VLFI
1 2 3 1 2 3 1 2 3 A K
WS-AT250
SUB WOOFER MAIN SPEAKER
RECOMMENDED FUNCTION SE LE CTOR SETTING
FUNCTION SELECTOR POSITION
WS-AT200
For further details please refer to the Operating Instructions of the RAMSA Subwoofer Processor WS-SP2A.
Note: Make sure to lower the volume control of the
amplifiers if the output sound suddenly decreases.
Keeping or even increasing the volume can cause
serious damage to the speaker.
This shows an example of system connections.