PYLE Audio PYLE PRO PT-649D - Manual (Page 2)

- 1 -
PANEL INFORMATION
2
LEVEL METER INDICATION
DECK B COUNTER
PLAY
A
FWD FWD
DYNAMIC NOISE REDUCTION
FULL AUTO STOP SYSTEM
NOISE REDUCTION
OFF ON
MIN MAX
REC LEVEL
B
REC/PLAY
HIGH SPEED DUBBING
FULL AUTO STOP SYSTEM
POWER
ON OFF
PLAY REW FF STOP/EJ. PAUSE REC PLAY REW FF STOP/EJ. PAUSE
PLAY CrO2 DUBBING HI.SP.DUB. REC CrO2
1 3 4 5 6 2
7 11 10 9 8 7
1. ON/STANDBY SWITCH
Depress button to switch “ON” the unit. Press release to switch “OFF” unit into “STANDBY MODE”. If the unit is left
unattended for long periods, remove the 13 AMP plug from the power socket.
2. CASSETTE HOLDER
3. DYNAMIC NOISE REDUCTION
Switch on Dynamic NR key for better result when tapes with Dynamic Noise reduced are playing.
4. PEAK LEVEL INDICATOR
These indicate the recording level during recording and output level during playback. The LED indication varies with
the signal strength during recording and playing.
* REC
This lights when Deck B is in the recording the record-pause mode.
* HIGH SPEED
This lights when in the high-speed dubbing.
* PLAY Cr02/METAL
This lights when the Cr02/metal function is operated.
* ERC Cr02
This lights when Cr02 function is operated.
5. TAPE COUNTER and RESET button ( DECK B)
When recording or playing, you can use the tape counter to count the tape length.
6. REC LEVEL SWITCH
Adjust the record level.
7. CASSETTE OPERATION BUTTONS
● (REC)
► (play):
Press to play the tape.
◄◄ (rewind)
Press to rewind the tape.
►► (fast forward)
Press to fast forward the tape.
(stop/eject)
Press to stop the tape. Pressing this button after the tape stops to open the cassette holder. (The tape automatically stops
when it reaches the end.)
I I (pause)
Press to temporarily stop the tape in the record or playback mode. Press it again to release the pause mode and restart
the tape.
8. REC Cr02 SWITCH
For recording with Cr02 tape.
9. HIGH SPEED DUBBING SWITCH
When you need high dubbing, press this switch and the relative light will be lit.
10. DUBBING SWITCH
Press the DUBBING button when you need Dubbing at normal speed.
11. PLAY Cr02 SWITCH
When play Cro2 tape, press this button.