Proxima ASA 4100/4200 - Manual (Page 34)

Using the Desktop Projector™ 4100/4200 3-9
CONTROL PANEL INDICATORS
Power, warning, and alert indicators give you important information about
how your projector is working.
Source
Setup Menu
Power
7
Over-Temperature
Replace Lamp
3
Desktop Projector™ 4200
Figure 3-5 DP4100/4200’s Control Panel indicators
INDICATOR FUNCTION
Glows green if AC input and projector power supplies are okay.
Glows red if not.
Glows red to warn of an over-temperature condition.
Glows red if the projection lamp burns out.
Power
The power indicator glows green after you turn on the AC power switch and
the projector completes a self check.
Over Temperature
The indicator illuminates if the projector overheats.
An over-temperature condition automatically turns off the power to the
lamp until the projector cools.
If an over-temperature condition occurs, perform the following checks while
you allow the projector to cool:
• Verify that the room temperature is below 104
°
F (40
°
C) when projecting
in color or 95
°
F ( 35
°
C) when projecting in Workgroup (monochrome)
mode.
• Check the intake and exhaust vents. Clear any obstruction to the air flow.