Patton electronic SL4050/10 - Manual (Page 71)

Compliance 71
SmartLink 4050 Series Getting Started Guide A • Compliance information
Compliance
EMC Compliance:
FCC Part 15, Class B
EN55022, Class B
EN55024
Safety Compliance
EN60950-1
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause radio interference in which case the user will be required to correct the interference at his or her
own expense.
Radio and TV Interference
The SmartLink SIP Phone generates and uses radio frequency energy, and if not installed and used properly-
that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television
reception. The SmartLink SIP Phone have been tested and found to comply with the limits for a Class B com-
puting device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to
provide reasonable protection from such interference in a commercial installation. However, there is no guar-
antee that interference will not occur in a particular installation. If the SmartLink SIP Phone does cause inter-
ference to radio or television reception, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the following measures: moving the computing
equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment
into a different AC outlet (such that the computing equipment and receiver are on different branches).
CE-Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.
CE notice (Declaration of Conformity)
We certify that the apparatus identified in this document conforms to the requirements of Council Directive
1999/5/EC on the approximation of the laws of the member states relating to Radio and Telecommunication
Terminal Equipment and the mutual recognition of their conformity.
The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the
above directive is indicated by the CE sign on the device.