Patton electronic SL4050/10 - Manual (Page 29)

Setting up the VoIP SIP phone 29
SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone
CF (call forward) User Busy
Forward all the incoming calls to another number when user is busy on the phone.
1. Press .
2. Use or to select ENABLE or DISABLE
CF (call forward) No Answer
Forward all incoming calls to another phone number after a certain number of rings.
1. Press .
2. Use or to select ENABLE or DISABLE
Anonymous Call
Enables the caller (user) to hide the name and phone number from the receiver.
1. Press .
2. Use or to select ENABLE or DISABLE
Anony Call Rej (anonymous call rejection)
Reject any anonymous incoming calls.
1. Press .
2. Use or to select ENABLE or DISABLE
Ringing Type
Select the ring tone. There are four ring tones in total.
1. Press .
2. Use or to select ENABLE or DISABLE
Note Pressing to exit menu. When asked to save or cancel, press to
SAVE.