Patton electronic SL4050/10 - Manual (Page 59)

Mute 59
SmartLink 4050 Series Getting Started Guide 4 • Operating the VoIP SIP phone
Mute
Note While mute is activated, sounds the caller makes can be heard through your
speaker but sound from your side will not be heard by the caller.
While having a conversation, press the Mute button. To resume the conversation, press
Mute again.
Call Transfer
While having a conversation:
1. Press the Transfer button to put the person on the other line on hold.
2. Dial the IP address or the extension number where you like the call to be transferred.
3. Press the Transfer button again to transfer the call.
Redial
Note To return to idle mode, press the CANCEL button.
Last Dialed Number
1. Lift the handset or press the SPEAKER button.
2. Press the Redial button to dial the last dialed number.
Through Call History
1. Press the Redial button. Do not lift the handset when you press Redial .
2. Press the Redial button again to cycle through the dialed, missed, and received calls.
3. Press the down button to scroll down the dialed, missed, and received numbers until the desired num-
ber is displayed on the screen.
4. Press the left or right buttons to show detail information on every call.
5. Lift the handset or press the OK button.