Pioneer DVR-450H-S - Manual (Page 49)

Recording
49
En
05
• To cancel Auto Start Recording, press
STANDBY/ON while the recorder is in
standby. The AUTO indicator goes off.
• To cancel Auto Start Recording once
recording has already started, press
ì REC for three seconds (this cancels
Auto Start Recording, but recording
continues), then
STOP REC to stop
recording.
• You can also stop recording by pressing
STOP REC then selecting Yes to
confirm.
Tip
• Alternatively, with no OSD displayed,
press and hold the front panel
STOP REC button for more than three
seconds to switch Auto Start Recording
on directly. After switching on, switch
the recorder into standby.
When using the Video Control function of an
external component, set the
HDMI Control
to Off (page 115).
Playing your recordings on
other DVD players
Most regular DVD players can play finalized
discs recorded in DVD-R/-RW (Video mode)
and DVD+R discs. A number of players
(including many Pioneer models) can also
play DVD-RW discs recorded in VR mode,
finalized or not. Most players will not play VR
mode DVD-R discs, although some DVD-
ROM drives and DVD recorders may be able
to (finalization might be necessary). Check
the manual that came with the player to
check what kinds of discs it will play.
When you finalize a DVD-R/-RW (Video
mode) or DVD+R disc, a title menu is
created from which you can select titles
when you play the disc. There are a number
of different styles of title menu to choose
from to suit the content of the disc.
All the title menus are navigated in the usual
way, pressing
MENU or TOP MENU to
display the menu, then using the / / /
followed by ENTER to select titles and
start playback.
Finalizing a disc
Finalizing ‘fixes’ the recordings on the disc
so that it can be played on a regular DVD
player or computer equipped with a suitable
DVD-ROM drive.
1
Note that the disc name will appear in the
title menu after you finalize a disc. Make sure
the disc name is as you want it before you
finalize the disc as it can’t be changed
afterwards. If you want to rename the disc,
see
Input Disc Name on page 100 before
starting the steps below.
DVD+RW discs don’t generally need
finalizing. However, if you want a title menu
to appear when you play the disc, then you
will need to finalize. When using a
DVD+RW, you can still record and edit even
after finalizing. although the title menu will
disappear if you do so. Finalize the disc
again to generate a new title menu.
Important
• Once you’ve finalized a DVD-R/-RW
(Video mode) or DVD+R disc, you can’t
edit or record anything else on that disc.
However, the finalization on a DVD-RW
disc maybe ‘undone’; see
Undo Finalize
on page 101 for how to do this.
DVD (VR) DVD (Video) DVD+R DVD+RW
Note
1 If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize
the disc. See Additional information about the TV system settings on page 117 for how to change the recorder’s
setting.
DVD (VR) DVD (Video) DVD+R DVD+RW
DVR650HS_TLT_EN.book 49 ページ ２００７年３月２０日 火曜日 午後１２時１９分