Panasonic PV-HS2000 - Manual (Page 57)

57
POWER
RECORDING
NEW CONTENT
P V- H S 2 0 0 0
Location of Controls
INPUT
R
1
2
AUDIO
ANT/CATV
IN
VIDEO L
S-VIDEO
IN
OUTPUT
R AUDIO VIDEO L
S-VIDEO
OUT IR
BLASTER
PORT
SERIAL
CONTROL
TEL LINE
AC~IN
LINE
Power LED
Solid green indicates the
Hard Disk Recorder is on.
Power Button
Manually switch between
On and Standby modes.
RECORDING LED
Lights red when the Hard Disk
Recorder is recording a show.
NEW CONTENT LED
Lights green when the Hard Disk Recorder
has completed recording a show.
ANT/CATV IN
Antenna/Cable
input terminal.
INPUT LINE 1
Audio(L/R)/video input connector
with conventional (composite) video.
INPUT LINE 2
Audio(L/R)/video
input connector with
(composite) video.
S-VIDEO IN
S-Video input
connector for
LINE2.
OUTPUT LINE 1
Audio(L/R)/video output
connector with conventional
(composite) video.
OUTPUT LINE 2
Audio(L/R)/video
output connector with
(composite) video.
S-VIDEO OUT
S-Video output
connector for
LINE2.
IR BLASTER PORT*
Infrared (IR) jack for
controlling a satellite or
cable box with IR control.
SERIAL CONTROL*
Serial port for linking a Satellite
Receiver with a serial port.
TEL LINE
Telephone jack
(required) for connecting
to the ReplayTV Service.
AC IN
AC Power plug
connector.
* Serial and IR controls are used only with Satellite receiver equipment and cable boxes.
Serial control can be used only with a Satellite receiver that has a serial port.
Front View of the Hard Disk Recorder
Rear View of the Hard Disk Recorder
PanaHDR- P42-.p65 00/11/28, 14:48 57