PYLE Audio PYLE PRO PT658C - Manual (Page 3)

OPERATING PROCEDURES
OUTPUT
REMOTE SYSTEM
TO AMP
CD
E Q TA PE TU NER
TU NER CD AU X P LAY REC
TA PE
P LAY REC
E Q
CD
L
R
REMOT E SYSTEM
_
A U DIO
L
RIGHT LEFT
_
AV1 AV2
INTEGRATED CIRCUIT
AC 220V - 230V ~50Hz
PA
V O LTA G E S E L E C T O R
2 20 ~2 30 V
5 0H z
1 10 ~1 20 V
6 0H z
VO LTAG E SEL ECT O R
220~ 230V 50Hz 110~ 120V 60Hz
INTEGRATED CIRCUIT
AC 220V - 230V ~50Hz
VOLTAGE SELECTOR
Use this switch to
select the proper
Voltage for your region
Operating procedure
* Switch on the Amplifier.
* Select “CD” from function selection column at the Amplifier, relative light will be seen when selected.
* Turn on the CD player by pressing POWER switch (1).
* Press the OPEN/CLOSE button. The disc tray will slide out. When it has opened fully, place a compact disc carefully in
the tray.
**Note** (a) Always place the compact disc in the disc tray with the label facing upward.
(b) The CD tray accepts two different sizes of disc: 120 mm & 80 mm.
(c) This CD player can also playback CDR/CDRW disc.
* To close the disc tray, press the OPEN/CLOSE button again. When the tray is securely closed the disc will start turning
automatically and the total number of selections and the disc time will be counted. A few seconds later the PLAY
indicator will light, and the TRACK NO. and TIME counters will show “10:00”.
Press the PLAY/PAUSE button. Playback will start, the PLAY indicator “►” will go on.
SPECIFICATIONS
Output voltage…………………….2 Vrms (0 dB)
Freq. Response……………………20 to 20 KHz
+3dB-- -3dB
Sin ratio (FLAT)…………………..75 dB (1 KHz)
(IHF-A)………………….90 dB (1 KHz)
Channel separation………………..58 dB (1 KHz)
Channel balance…………………..0.5 dB (1 KHz)
Distortion…………………………(-10dB) 0.08% (1 KHZ)
Power consumption………………10W
Dimensions ………………………..420 x 90 x 250mm (W x H x D)
Weight……………………………..3.5 Kg