Panasonic DVD-LS90 EN - Manual (Page 6)

6
RQT8067
Preparations
1 Attaching the battery
(When the unit is off)
The illustrations show how to attach the CGR-H702. Attach CGR-H703 in the same way.
Detaching
≥ Turn the unit off before detaching the battery pack.
≥ The illustrations show how to detach the CGR-H702. Detach CGR-H703 in the same way.
When not using for long periods of
time
≥Remove the battery pack ( ➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
≥Recharge the battery for re-use.
RELEASE
DETACH ATTACH
Clicks into place
Check to make sure it is securely fastened.
RELEASE
DETACH ATTACH
Bottom side of this unit
Battery pack
RELEASE
DETACH ATTACH
1
Press and hold
2
DC IN 12V
VIDEO AUDIO/OPT OUT
1 2
3
DC IN
DC IN 12 V  %
To
household
AC outlet
AC adaptor
(included)
AC power supply cord
(included)
≥ You can also use this unit without charging while
connecting the AC adaptor and the AC power supply
cord.
To conserve power
This unit consumes 0.5 W of power even when turned
off. When the unit is not going to be used for a long time,
disconnect the AC power supply cord from the
household AC outlet.
The unit is in the standby condition (the [ Í] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.
2 Recharging the battery
(When the unit is off)
[ Í] goes out ➜ lights
[CHG] lights ➜ goes out
Recharging time :
[DVD-LS90]: Approx. 8 hours
[DVD-LS93]: Approx. 13 hours
When finished, disconnect the AC
adaptor and the AC power supply cord.
Í CHG
Started Finished
Pre
parat
ions