Palsonic PSML-826 - Manual (Page 10)

TUNE TUNE
Tuning stations
RADIO
listening
10
Programming station presets
Selecting station presets
On the machine select the tuner function and the band by pressing
BAND / TUNER button. The other buttons are on the machine too.
If you try to store a 31st FM / 16th AM (MW) station, the display will
show "FULL".
To clear a preset station, select it, press / CLEAR , then / SET for 3 seconds.
You can use the button of the remote control to switch back to stereo.
FUNCTION
BAND
Select the tuner function.
Select the band.
To find weak stations too, press
repeatedly while tuning.
To find powerful stations quickly tune
automatically keeping either button
pressed until tuning starts.
A station is being received.
FM stereo broadcasts with too
much noise can be switched to
mono for less noise.
Find a station as under "Tuning
stations".
Store.
The system assigns a station to
a number beginning with 1 one
after another.
You can store up to 30 FM /
15 AM stations.
Select lower or higher preset
numbers.
TUNE TUNE
TAPE 1/2
PRESET
TAPE 1/2