Powermatic PWBS-14 - Manual (Page 5)

Miter Gauge
A full-featured miter gauge is included, sized specifically for use with the POWERMATIC
PWBS-14 Bandsaw. The miter gauge fence can be locked at any setting
up to 60–degrees to the left or right. The flat, machined aluminum fence face features screw slots
for attaching your shop-made faces or jigs for specialty jobs.
Work Light
We also added a handy work light, mounted on a flex shaft that
allows positioning it where needed to best illuminate the work. The
work light uses a 40-watt bulb that provides plenty of light on the
table without causing glares or introducing unnecessary heat. The
work light also has its own switch so it can be turned on only when
needed independently of the POWERMATIC PWBS-14 Bandsaw
motor.
We built-in a handy work
light on a flexible shaft to
make seeing what you are
doing a little easier.
Accessories
Mobility
Being able to move larger machines to the best open area within modern shops is important to
safety and productivity. The #2042377 mobile base has been specifically designed to fit the base
cabinet of the POWERMATIC PWBS-14 Bandsaw precisely
and to easily handle weight. A full swivel caster on one end
makes guiding the POWERMATIC PWBS-14 Bandsaw easy,
even through tight areas.
If being able to move your machines
is a priority, our fully-welded mobile
base rolls smoothly yet all three
wheels lock for maximum stability.
The caster wheel has a step-on locking lever while both fixed
wheels have knobs that when screwed in, firmly lock those
wheels. The result is a very stable platform when locked down
for use.