Pioneer VSX-1016V-K - Manual (Page 22)

Controls and displays 04
22
En
13 Input source buttons
Press to select an input source (press VIDEO SELECT
repeatedly to select the video source (page 52)).
14 VIDEO/GAME INPUT
See Connecting a component to the front panel inputs on
page 16.
15 USB interface
Connect a USB audio device for playback (see Using the
USB interface on page 31).
16 MCACC SETUP MIC jack
Use to connect the supplied microphone.
17 SYSTEM SETUP
Press to access the System Setup menu (see page 36).
18 RETURN
Press to confirm and exit the current menu screen.
19 TONE
Press this button to access the bass and treble controls,
which you can then adjust with the
MULTI JOG dial
(page 30).
20 TUNING/STATION
Use to find radio frequencies and to select preset
stations (page 33).
21 TUNER EDIT
Use with the MULTI JOG dial to memorize and name
stations for recall (page 33).
22 SPEAKERS
Use to change the speaker system (page 45).
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
DOW N
30
30
7 m
DOW N
VSX-1016_HY.book.fm 22 ページ ２００６年２月２４日 金曜日 午前１１時５３分