PYLE Audio PLTK120 - Manual (Page 3)

3 8
Precautions
1. Do not operate this equipment while driving, safe driving should always be your highest priority.
2. Do not install these components in an area exposed to rain, moisture, direct sunlight, extreme
heat or cold, excessive dust, dirt or humidity.
3. Immediately unplug the power cord and send the TV Tuner to your local dealer or service center as soon as
possible:
a) If there is smoke or any peculiar odor present during use.
b) If there is damage to any of the component casings.
4. To avoid damage and risk of electronic shock, protect this equipment from getting humid or wet,
If this does occur, unplug the power cord immediately and send the unit to your local dealer
or service center as soon as possible.
5. Do not attempt to repair, open or disassemble any of the components. Dangerous high voltage is present
and may cause an electric shock.
6. Use only a power source with 12 Volts DC (negative ground).
7. Do not place objects on or suspend objects from the power cord, as this may damage the cord.
8. Do not twist or place the power cord near any source of heat in the vehicle.
9. Do not attempt to repair a damaged, broken or deffective power cord. Replace it with a new one immediately.
Please read this manual completely and carefully before installing the equipment. POWER MUTE
VOL+ VOL-
CH+
CH-
MENU
AVC AUTO
TV TUNER REMOTE
Selecting channels and adjusting the sound
Use the CH+ and CH- buttons to select channels.
Use the VOL+ and VOL- buttons to increase or decrease audio volume.
You will see a Volume Bar on screen indicating relative volume level.
To disable the audio output, press the MUTE button. To cancel the muting
function, press MUTE button again.
Please note: VOL+, VOL- and MUTE buttons are disabled in AV mode.
Providing A/V audio to your car radio
If your radio has AUX line-level inputs, you can attach the A/V audio output
connectors to these inputs with RCA-RCA interconnect cables.