ParaBody 886101 - Manual (Page 3)

PARTS LIST
STEP 1:
FIGURE 1
3
• SECURELY assemble the ARM PAD (2) to the ARM CURL FRAME (1) using two 3/8” X 1-1/4” BOLTS (3), two
3/8” LOCK WASHERS (5), and two 3/8” LOCK NUTS (4) as shown in FIGURE 1.
1
2
DESCRIPTION
ARM CURL FRAME
ARM PAD
3/8 X 1-1/4” BOLT
3/8” WASHER
3/8” LOCK WASHER
PART #
6418502
6533801
3102901
3102501
3102601
KEY
1
2
3
4
5
QTY
1
1
2
2
2
BENCH FRAME
3/8 X 1-3/4” 3
4
5
• Insert the ARM CURL ATTACHMENT into the UPRIGHT TUBE of the BENCH FRAME as shown in FIGURE 1,
and tighten in place using the THUMBSCREW.
Thank you for purchasing the PARABODY 886101 ARM CURL ATTACHMENT. If unsure of proper use of
equipment, call your local PARABODY distributor or call the PARABODY customer service department at
(800) 328-9714.