Panasonic CU-W7DKR - Manual (Page 5)

● Press CLOCK more than 10 seconds to change the time format from 24 hours to AM/PM format.
● For your convenience, you could set the air conditioner to operate automatically by using both ON and OFF timer.
Hint
Troubleshooting
● TIMER indicator always on. ➤ Timer is activated and the setting will repeat itself daily.
● POWER indicator is blinking 30 minutes before ON
timer is activated.
➤ The unit is determining the operation mode by sensing the room
temperature. This happens when it has been set to AUTO operation
mode.
HOW TO OPERATE
Timer
■ Operation Details
• Use the ON timer to turn on the air
conditioner at the desired time. This
will give you a cooling or warming
environment, e.g. when you return
from work or wake up.
• When the ON timer is set, operation
will start 15 minutes for COOL/DRY
or 30 minutes for AUTO/HEAT
before the actual set time.
• Use the OFF timer to stop the air
conditioner operation at the desired
time. This can save electricity while
you are going out or sleeping.
• The set timer will repeat daily once
it is set.
• If there is a power failure, you can
press SET button to restore the
previous setting once the power is
resumed.
• If the timer is cancelled, you can
restore the previous setting by
pressing SET button.
TIMER
● Ensure the clock on the remote control has been set
correctly.
● You could use the ON and OFF timers at the same time.
● To cancel either the ON or OFF timer, press or ,
then press .
1
Select ON or
OFF timer.
2
Set the
desired time.
3
Confi rm the
setting.
CANCEL
Cancel the
selected timer.
43
CS-W7DKR CU-W7DKR / CS-W9DKR CU-W9DKR / CS-W12DKR CU-W12DKR