Panasonic DVD-PS3 - Manual (Page 9)

Quick setup [DVD-PS3]
§ \DVD-LS5\: S video cable is not included
§ Available from Panasonic dealers. Part number: K2KC4CB00006
Note
≥ \DVD-LS5\ The unit’s speaker does not have magnetic shielding. Do not place the unit near
televisions, personal computers or other devices easily influenced by magnetism. Do not keep this
unit and magnetized cards (bank cards, commuter passes, etc.) close together.
≥ Volume may be lower when playing DVDs than when playing other discs or during TV broadcasts.
If you turn the volume up, reduce it again so that a sudden increase in output does not occur.
15
RQT7074
Getting Started
14
RQT7074
Getting Started The QUICK SETUP screen appears when you
press [SETUP] the first time after purchase and
assists you to make necessary settings.
1
Press [Í] to turn the unit on.
2
Press [SETUP] to show the
QUICK SETUP screen.
e.g. Units for the United Kingdom and
Continental Europe
3
Press [3, 4, 2, 1] to select
the menu language and press
[ENTER].
4
Press [3, 4] to select “Yes” to
continue and press [ENTER].
5
Press [3, 4, 2, 1] to select
the item and press [ENTER].
≥ Audio Language ( ➡ page 32)
≥ Subtitle Language ( ➡ page 32)
≥ TV Aspect ( ➡ right)
6
Press [ENTER] and then
[SETUP] to end the settings.
To access this screen again later
➡ page 33, Others—QUICK SETUP
∫ ; 1
1 3 2
A.SRD
SETUP
ENTER
PLAY MODE
SUBTITLE DISPLAY TOP MENU
AUDIO
ANGLE
RETURN MENU
CANCEL
3 ,4,
2 ,1,
ENTER
SETUP
RETURN
Í
Using this unit with a television
VIDEO VOL AUDIO/ OPT OUT
AUDIO IN
L
R
S VIDEO
VIDEO
Television
Audio/video cable
(included)
S video cable §
black yellow
yellow white
Either of these
red
This unit (Right side)
S VIDEO input terminal:
achieves a more vivid
picture than the VIDEO
input terminal.
≥ When making this
connection, ensure you
connect the audio
cables to the
corresponding audio
input terminals on the
television.
Connection
The explanations in this section use DVD-PS3 as an example, but the same connections and
settings are possible with DVD-LS5.
Before connecting, turn off all equipment and read the appropriate operating instructions.
Do not connect the player through your video cassette recorder. The picture may not be played
back correctly due to the copy guard.
[For\the\United\Kingdom\and\Continental\Europe]
Use the RCAJ adaptor (not included) if your TV has a 21-pin SCART terminal.
RCAJ adaptor (not included)
To the television’s
21-pin SCART
terminal
red
yellow
white
black
yellow
Audio/video cable (included)
To [AUDIO/OPT OUT]
To [VIDEO]
Note
≥ To return to the previous screen
Press [RETURN].
≥ Press [MENU] on the main unit to access the SETUP menus when a disc is not loaded.
Selecting TV screen type
Select “4:3” (regular) or “16:9” (widescreen) to
suit your television.
1
Press [Í] to turn the unit on.
2
Press [SETUP] to show the
menus.
Disc
SELECT
Audio
Subtitle
Menus
English
English
Automatic
SETUP
TAB
3
Press [2, 1] to select the
“Video” tab.
4
Press [3, 4] to select “TV
Aspect” and press [ENTER].
5
Press [3, 4] to select the
item and press [ENTER].
≥ 4:3 Pan & Scan
≥ ( [DVD-PS3] : factory preset)
≥ Widescreen software is expanded to fill
≥ the screen of a 4:3 aspect television
≥ (unless prohibited by the producer of the
≥ disc).
≥ 4:3 Letterbox
≥ Widescreen software is shown in the
≥ letterbox style on a 4:3 aspect television.
≥ 16:9 ( \DVD-LS5\ : factory preset)
≥ Wide-screen television.
≥
6
Press [SETUP] to end the
settings.
SELECT
English
Deutsch
Español
Svenska
Français
Italiano
Português
Nederlands
SETUP
ENTER RETURN
QUICK SETUP
Select the menu language.
Preparations
Turn on your television and switch the video
input mode on the television to suit the
connection for the unit.