4 position indicators, 5 satellite status indicators – Panasonic 3.0 User Manual

Page 10

Advertising
background image

EchoMap v3.0

10

2.4 Position Indicators

Directly below the direct to indicator is

the navigation box. This box displays

current navigational information during

flight. The first two lines are Distance

to the Waypoint and Ground Speed.

The third line displays the Estimated

Time Enroute (ETE) to the target

waypoint. ETE is computed on your

actual track and closure rate, (not just

distance divided by ground speed), to

give you an extremely accurate time.

For this reason, the ETE indicator will disappear when your track is

90 degrees or more off from the target heading.
The final line indicates your altitude in feet above mean sea level.

This altitude will appear in yellow when your aircraft is 500-1000

feet above the terrain and red when within 500 feet or less. When

GPS reception is less than 4 satellites no altitude is displayed and

you will receive a No Alt warning in the Obstacle clearance panel.

Note:

Although government Selective Availability has been removed, the

system is not to be used for primary vertical navigation or IFR navigation.

2.5 Satellite Status Indicators

Directly below the navigation box

are the satellite status indicators.

There are four indicators, upper-

left is the status of the

ORBCOMM satellite connection,

lower-left is the GPS lock status,

upper right is the WX status

which lets you know what

weather product is being displayed, and lower right is the Msg

status. The indicators will also display an arrow up or down to

show that the system is transmitting or receiving data from the

satellite.
Below these indicators is a small text box that outputs status

information that is written to status log. The text is small because

it is not necessary to read this information during flight.

Advertising