PhatNoise Car Audio System - Manual (Page 15)

Section II: Setting up at Home
Installing the PhatNoise Music Manager software
The PhatNoise Music Manager software is included on the CD found in
your package. You can use the software to create and manage
playlists of MP3s, WMA and WAV files.
! You must install the PhatNoise Music Manager software on
your computer before you connect the USB cradle to your
computer.
To configure the software, it is very important to follow these steps in
order. Windows 98 Second Edition and above (Windows
Millenium, Windows 2000, Windows XP) is required to use the
PhatNoise Music Manager.
1. Exit all running Windows programs.
2. If the DMS Cartridge is inserted into the USB cradle, remove it
now.
3. Insert the PhatNoise Music Manager software CD into your PC's
CD-ROM drive. Wait a few moments. The PhatNoise Music
Manager software installation program will launch automatically.
4. If the PhatNoise Music Manager software installation program
does not run, follow these steps to run the software manually:
a. Click the “Start” button in the lower left corner of your
screen and select "Run...". The Run dialog box appears.
b. Type the following text in the drop-down list box:
d:\PMM_setup.exe
where "d:" is the letter corresponding to your CD-ROM
drive.
c. Click OK.
5. Follow the instructions to install the PhatNoise Music Manager
software.
Page 15
PhatNoise Car Audio System User Manual
1302-MAN Copyright 2003 PhatNoise Inc.