Philips DVD Micro Theater MCD988 - Manual (Page 17)

English
17
Functional Overview
DVD player and power amplifier
1 ECO POWER/STANDBY-ON y
– switches on the system or puts it on to Eco
power/normal standby mode.
2 Display
– shows the current status of the DVD player.
3 IR SENSOR
– points the remote control towards this sensor.
4 ÉÅ
– starts or interrupts disc playback.
5 STOP 9
– stops disc playback or erases a program.
– in Demo mode (on the system only), activates/
deactivates the demonstration.
6 ¡ / ™
Disc:
– skips to the previous/next chapter/title/track.
Tuner:
– tunes to a higher/lower radio frequency.
– press and hold, then release the key to
start automatic search for a radio frequency
downward/upward.
7 MOVING SURROUND
– enables / disables the surround sound effect with
moving speakers
8 DISC 1 OPEN•CLOSE ç/ DISC 2
OPEN•CLOSE ç
– opens or closes the disc tray.
9 SOURCE
– selects the respective sound source: DVD/AUX/
TUNER (FM)/USB.
– switches the system on.
0 DISC 1 / DISC 2
– selects and plays disc 1 or disc 2.
! VOLUME -/+
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode
– switches the set timer ON or OFF.
@ DSC
– selects different types of preset sound equalizer
settings
For CD: CLASSIC, POP, JAZZ, ROCK;
For DVD: CONCERT, SCI-FI, DRAMA, ACTION.
# SLIDE OPEN
– slides down to open the covering plate for USB,
LINE IN and headphone jacks.
$ USB DIRECT
– the jack for the external USB mass storage
device.
1 5 6 ! 3 2 4
9 $ % ^ # 8 0 8 0@ 7
pg 001-024_MCD988_Eng-12 2007.6.14, 15:53 17