Planet Technology FSD-624SF - Manual (Page 5)

Quick Installation Guide for FSD-624SF
- 5 -
Now, you can use the Web management interface to continue the Switch
management, please refer to the user manual for more.
#
Notice:
For security reason, please change and memorize the new password after
this first setup.
While IP Address be changed or forgotten admin
password –
To reset the IP address to the default IP Address “192.168.0.100” and
the username /password to factory default mode (default user name and
password is admin). Press the hardware reset button at the rear panel
about 5 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx and
default username / password.
Customer Support
Thank you for purchase PLANET products. You can browse our online
FAQ resource at the PLANET Website first to check if it could solve you
issue. If you need more support information, please contact PLANET
switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]
Copyright
© PLANET Technology Corp. 2008.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
Hardware Reset
CE 2010-A33190-000