Panasonic DMR-EH58 - Manual (Page 18)

18
RQT9075
Timer recording using G- CODE system [For]Australia]and]N.Z.]
Refer to “Advanced timer recording” ( ➡ 24–25) for
detail information.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate AV input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( ➡ 15).
≥Make sure that the clock settings are correct ( ➡ 61).
Entering G- CODE numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
2
Press the numbered buttons to enter
the G-
CODE number.
Press [ 2] to move back to correct a digit.
3
Press [OK].
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[
3, 4, 2, 1] ( ➡ 24, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [ 3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [
Í DVD] to turn the unit off.
∫ To cancel recording when recording has already
begun (
➡ 24)
∫ To release the unit from recording standby
( ➡ 24)
∫ Notes on timer recording ( ➡ 24)
G- CODE is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
STATUS F Rec REC MODE REC
MANUAL SKIP AUDIO DISPLAY
CREATE
CHAPTER
FU
NC
TIO
N M
EN
U DI
RE
CT
N AV
IG
AT OR
PR OG/CHECK
RETURN
PLAY/x1.3 PAUSE STOP
SLOW/SEARCH SKIP
INPUT SELECT
CH
0
9 8 7
6 5 4
3 2 1
CH
AV
¦
TV
DRIVE
SELECT
¦
DVD
VOL
DELETE G-Code
EXIT TIME SLIP
OK
OPTION
-/--
3, 4
1
2
¦ DVD
[Australia]and]N.Z.]
G-Code
Record 1:58 SP DVD 30:24 SP HDD Remain
TUE 14.10.08. 12:53:00
Input G-Code Number 0-9, and press OK.
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
TUE 14.10.08. 12:54:00
Mode Stop Start Name Date
HDD
DVD
20:00 19:00 15. 7. TUE SP HDD 1 ARD
Programme Name
No. Name
ARD 01
&
Timer icon
TUE 14.10.08 12:56:00
Mode Stop
HDD
DVD
HDD
Drive
space
SP OK 20:00
Programme
Check to make sure “OK”
is displayed (
➡ 25).
RQT9075-L-Body1_mst.fm 18 ページ ２００８年２月２９日 金曜日 午前１１時５７分