Polk Audio SurroundBar 400 Component Home Theater Speaker Bar CHT400 User Manual
Page 12
SURROUNDBAR (7CH)
TV
SURROUNDBAR CHANNEL MODE OPTIONS
While the SurroundBar CHT was designed to reproduce
an enveloping surround experience in the 7CH mode,
we have given you the option of adding satellite loud-
speakers to create even more precise surround effects.
Connect additional satellite speakers and set the
SurroundBar’s channel mode switch to either LCR
or 5CH. (See optional settings below)
SURROUNDBAR ONLY IN 7CH MODE
No satellites are hooked up. SurroundBar reproduces LCR,
Surround Left (SL), Surround Right (SR), Surround Back
Left (SBL) and Surround Back Right (SBR) channels.
SURROUNDBAR IN LCR MODE
WITH FOUR SATELLITES
SurroundBar reproduces LCR channels. Connect Surround
Left (SL), Surround Right (SR), Surround Back Left (SBL)
and Surround Back Right (SBR) satellites directly to your
receiver with speaker wire. The four unused channels
of the SurroundBar 400 CHT cable should be “tied off”
with wire nuts (not required for the SurroundBar 500 CHT).
SURROUNDBAR IN 5CH MODE
WITH TWO SATELLITES
SurroundBar reproduces LCR, Surround Left (SL) and
Surround Right (SR) channels. Connect Surround Back
Left (SBL) and Surround Back Right (SBR) satellites
directly to your receiver with speaker wire. The two
unused channels of the SurroundBar 400 CHT cable
should be “tied off” with wire nuts (not required
for the SurroundBar 500 CHT).
SURROUNDBAR (LCR)
SL
SBL
SBR
SR
TV
SURROUNDBAR (5CH)
SBL
SBR
TV
ADDITIONAL CHANNEL MODE OPTIONS
12
Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)