Philips ShowView E9015ED - Manual (Page 6)

6
English
Setting Up your System
Connecting to a TV .
1 Disconnect the antenna or cable from your TV.
2 Connect the antenna or cable to the AERIAL of your System.
3 Connect black RF coaxial cable to the RF OUT on the rear
panel of the System and to the ANTENNA IN on the TV.
4 Connect the AV1 (TV) jack on the System to the correspond-
ing connector on the TV.
Note:
– Ensure that the “TV” indication on SCART cable is con-
nected to the TV set and “DVD” indication on SCART
cable is connected to the System.
5 Plug in the power cords of the TV and the System.
Basic Connections
• Please refer to the instruction books of your TV,VCR, Stereo
System or other devices as necessary to make the best con-
nections.
• Make one of the following connections, depending on the
capabilities of your existing equipment.
The following guidelines are options for the best picture and
sound quality available on your System.
Picture
1 Use SCART RGB Output (DVD/VCR(AV1 TV)) for best picture
quality (for DVD features).
2 Use S-VIDEO Output for the better picture quality (for DVD
features only).
3 Use SCART Composite Output for good picture quality (for
DVD and VCR features).
4 If your TV only has a RF-style (Antenna IN or 75 ohm) input,
use the RF OUT for connection and set your TV to channel 22
~ 69 with the same channel for the System is set (for DVD and
VCR features).
Sound
1 Digital audio connections provide the clearest sound. Connect
the System DIGITAL AUDIO OUT (COAXIAL) to your amplifier
or receiver (for DVD features only).
2 Use SCART Output (DVD/VCR(AV1 TV)) for better sound
quality (for DVD and VCR features).
Warning!
– Never make or change connections with the power
switched on.
– Connect the System directly to your TV, instead of eg. a
VCR, to avoid distortion because DVD video discs are
copy protected.
– If you use the Euro audio/video cable, it is not necessary
to use other audio cables.
ANTENNA 75
Ω ANTENNA 75
Ω FM (75 Ω) DIGITAL
AUDIO OUT
COAXIAL S-VIDEO OUT
MW FL FR C SL SR W SPEAKER (4 Ω)
RF OUT AERIAL
VCR
DVD/VCR
TV ANTENNA
AV2 (DECODER)
AV1(TV)
VIDEO L/MONO AUDIO R in 1
Antenna In
(on back of TV)
example only
OR
Antenna
Indoor/Outdoor
(300 ohm)
Cable
(75 ohm)
75 ANT CABLE
Back of DVD/VCR/TUNER
Black RF
coaxial cable
(Supplied)
RF OUT AERIAL
24. { B K L
(left/right/up/down) select an item in the menu
{ B
to choose a preset radio station (TUNER)
25. OK
acknowledge menu selection (DVD)
26. TUNER
press to put the System in TUNER mode and before using
the remote control for TUNER features
27. VCR
press to put the System in VCR mode and before using the
remote control for VCR features
28. RETURN
to return previous or remove setup menu (DVD)
29. CLEAR
to reset the setting (DVD)
to reset the counter (VCR)
to delete last entry/Clear programmed recording (TIMER)
(VCR)
30. ZOOM
enlarge DVD video image (DVD)
31. SUBTITLE
subtitle language selector (DVD)
32. ANGLE
select DVD camera angle (DVD)
33. STANDBY-ON y
switch the System ON or OFF
34. DISPLAY/STATUS/EXIT
to access or remove the display screen during DVD or Audio
CD playback (DVD)
to access or remove VCR’s on-screen status display/ to
remove VCR’s menu (VCR)
Functional Overview
E9015ED_EN.qx3 03.7.29 6:32 PM Page 6