PAC SWI-RC - Manual (Page 4)

4
Step B.
Press and
hold program-
ming/mode
button on
SWI-RC.
LED will light.
Step C.
Release
programming/
mode button.
SWI-RC
SWI-RC
SWI-RC
SWI-RC
Step 3 - Programming the SWI to Learn Steering Wheel Control Functions
Step A.
Turn the vehicle ignition to
the ON position.
LED will flash to
indicate set vehicle
version number.
OFF
ACC
IGN
STRT
The SWI-RC must be programmed in the specific order shown in the chart below. If you come across a command in the chart that your
steering wheel does not have, or you do not want to program, press the Program Button on the side of the SWI interface. The LED will
flash once rapidly and then stay on confirming that you have successfully skipped that command and are ready for the next button.
6/18/2010 - 11:41 AM swi-rc radio and button chart.xls
Switch Position 1 2 3 4 5 6 7 7 8
Radio Alpine JVC Kenwood Clarion Valor OEM
Advent, Boyo, Dual,
Visteon, Sony Pioneer Blaupunkt
1 Volume + Volume + Volume + Volume + Volume + Volume + Volume + Volume + Volume +
2 Volume - Volume - Volume - Volume - Volume - Volume - Volume - Volume - Volume -
3 Mute Mute Mute Mute Mute Mute Mute Mute Mute
4 Preset + Source Source Source Source Source Preset + Preset + Source
5 Preset - Track + Play Search + Track + Next Preset - Preset - Track +
6 Source Track - Track + Search - Track - Previous Source Source Track -
7 Track + Band/Disc + Track - Band Up Cursor Play/Ok Track + Track + Disc +
8 Track - Preset/Disc - Disc/FM + Down Cursor Band Track - Track - Disc -
9 Power Select Disc/AM - Ok Up Cursor Band Band Ok
10 Enter/Play Attenuation Answer Down Cursor Phone Menu
11 Band/Program Phone Receive BT Answer Answer Call
12 Phone Reject BT Hangup End Call
13 Voice Dial Voice Activation
14 Power
LED will
stay lit for 7
seconds.
SWI-RC
Step E.
Release the button.
The LED will turn on
back on.
Step D.
Within 7 seconds, press and hold for 5
seconds the button that is to be learned
on the steering wheel. Please note if
using in conjunction with the OS-4 or
MS-FRD1 the Source, Media or Speak
buttons cannot be held for more than
1.5 seconds.
The LED will turn off
during this process.
SWI-RC
VOL
VOL
Step F.
If you need to program more buttons,
repeat steps D & E for each additional
audio function on the steering wheel.
Program
remaining buttons
If you programmed the
module for version 4 please
refer to Appendix A