PYLE Audio PSW128ST - Manual (Page 4)

-4- -5-
Part 1b-Concrete Wall Mounting
.
Level wall plate(1) and use it as a template to mark four holes. Drill four 3/8
(10mm) dia. holes 2 (50mm) deep. Insert four anchors(G) into holes and
secure wall plate with four long bolts(F) and four washers(H).Tighten screws
firmly. Do not overtighten ”
”
Part 1b-Concrete Wall Mounting
Concrete Wall
2 ( ” 50mm)
Φ3/8 (10mm) ”
.
Part 2-Attaching Brackets To Screen
Center brackets vertically on back of screen. Select the small(A or B)
medium(C
). Attach brackets to screen using four selected screws and
four square washers(E) at the top and bottom of each bracket.
or
or D
Tighten screws
firmly. Do not overtighten
Part 2-Attaching Brackets To Screen
F
H
G
Square washer(E)
Small hole for
M4 screws
Medium hole for
M5 and M6 screws
E
A-D
UP
UP