Pioneer TAD M600 - Manual (Page 8)

8
Installation
WARNING
As the TAD-M600 is a large and heavy unit, make sure to move, unpack and install with four or more people. '
When installing, choose a level and flat surface that can sufficiently withstand the weight of this unit. Failure to do so '
could cause the unit to fall, resulting in an accident.
It is recommended that the TAD-M600 be installed directly on a solid floor surface. If installed on a shelf, the user is
responsible for confirming that the location is fully able to support the heavy weight of the amplifier.
To promote heat-emission, do not put objects on top of the TAD-M600 or cover with a sheet (such as cloth or curtains)
'
while operating. Failure to do so could cause the unit to malfunction through abnormal heating.
TAD-M600
Leave 60 cm (2 ft.) open
CAUTION
As the TAD-M600 emits a large amount of heat, do not place this unit on top of soft surfaces (such as carpeting or '
cushions) or in small spaces.
How to install
In order to improve sound quality and prevent damage to the floor or other installation surface, please use the accessory
spike bases.
Place the provided spike bases on the area of the installation site where the spikes will contact. 1.
Lay down the spike base template and place the spike bases on the corners of the template to accurately locate the
spike bases.
Spike base
Spike base template
Remove the spike base template and place the TAD-M600. 2.
Remove the spike base template carefully, taking care not to move the spike bases.
INSTALLATION AND CONNECTIONS