Primera Technology III - Manual (Page 27)

Creating Discs 23
Note: AIFF Files will need to be in a specific format in order for Discribe to
accept them. Please be sure that your hard disk has enough space for
the converted files and that the files adhere to the following
guidelines:
• Stereo
• 16 Bit
• 4431 KHz
Tip: SDII, MP3 and WAV files will be converted into this format, files
added from a mounted audio CD do not have to be converted, but can
be converted by holding down the Command key when dragging
tracks from a mounted audio CD to the interface. Discribe will
prompt you to find out where you would like the extracted tracks
saved.
4. Click the Audio… button to view the Audio Picker pane.
This will show all the tracks that have been added to your
current audio project. You can add tracks by clicking the
Add... button and navigating to the desired track, or you
can remove tracks by selecting them in the Audio Picker
window and clicking the Remove button.
Sequence your tracks by clicking and dragging the audio
track to the desired location within the Audio Picker pane.
You can select multiple files in the same way that the
Finder's 'List' view works (click and drag or by Shift
clicking on multiple files).
Discribe allows you to customize the pre-gap, or, the space
at the beginning of a track, from 0 to 9 seconds. To set the
pre-gap on a track or tracks, select the desired track(s) in
the Discribe Audio Picker window and click the pre-gap
pop-up menu and select the desired length of time.
Note: The first audio track must have a pre-gap of two and is not user
definable. By default, Discribe will set the pre-gaps of tracks 2 and
higher to 2 seconds.
1. You may preview audio tracks by selecting the desired
track and clicking the Play button.
2. If you are satisfied with the content of your audio
project, you are ready to write the disc. If you are still
in the Discribe Audio Picker window then click the OK
button to return to the main interface. Verify that the
510701a.qxd 3/13/03 11:09 AM Page 23
TOC INDEX