Fie (front image enhancer), Source level adjustment, Adjusting loudness – Pioneer DEH-15 User Manual

Page 14: Front image enhancer (f.i.e.), Adjusting source levels, Audio adjustments

Advertising
background image

Note

If you make adjustments when a curve other than
CUSTOM is selected, the newly adjusted curve
will replace the previous curve. Then a new curve
with CUSTOM appears on the display while se-
lecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the dis-

play.

2 Press a to turn loudness on.

LOUD indicator is displayed.

# To turn loudness off, press b.

3 Press c or d to select a desired level.

Each press of c or d selects level in the fol-

lowing order:

LOW (low)MID (mid)HI (high)

Note

You can also turn loudness on or off by pressing
LOUDNESS.

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a

simple method of enhancing front imaging by

cutting mid- and high-range frequency output

from the rear speakers, limiting their output to

low-range frequencies. You can select the fre-

quency you want to cut.

Precaution

When the F.I.E. function is deactivated, the rear
speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disenga-
ging F.I.E. to prevent a sudden increase in vo-
lume.

1 Press AUDIO to select FIE.

Press AUDIO until FIE appears in the display.

2 Press a to turn F.I.E. on.

# To turn F.I.E. off, press b.

3 Press c or d to select a desired fre-

quency.

Each press of c or d selects frequency in the

following order:

100160250 (Hz)

Notes

! After turning the F.I.E. function on, use the bal-

ance adjustment (refer to page 12) and adjust
front and rear speaker volume levels until they
are balanced.

! Turn the F.I.E. function off when using a 2-

speaker system.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the volume level of

the FM tuner, which remains unchanged.

1 Compare the FM tuner volume level

with the level of the source you wish to ad-

just (e.g., built-in CD player).

Audio Adjustments

En

14

Section

06

HHHHHHHHHHHHHH

Advertising
This manual is related to the following products: