Pioneer CNDV-1000HD - Manual (Page 6)

Input screen for “Address Book”, “Phone
Book ”, “LIBRARY (Music Library)”
Others, 0-9:
Touch to toggle the selection.
Small, Caps.:
This is a new feature. Either lowercase or
uppercase letters can be selected. Touch to
toggle the selection.
Input screen for “Edit VIN” and “Edit
Policy Number ”
Small, Caps.:
This is a new feature. Either lowercase or
uppercase letters can be selected. Touch to
toggle the selection.
Time restrictions
This is a new feature. This setting controls
whether streets or bridges have traffic restric-
tions during a certain time should be taken
into account.
p If you want to set your route to avoid raised
draw bridges, select
“On”.
p Settings marked with an asterisk (*) show
that these are default or factory settings.
1 Touch the key in the following order in
the navigation menu.
[
Destination] d [Route Overview] d [Op-
tions]
p “Route Overview” is active only when the
route is set.
2 Touch [Time restrictions] to change the
route calculation conditions.
Touching this option switches the setting “On”
or “Off”.
On*:
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
Off:
Calculates a route while ignoring traffic re-
strictions.
3 Touch [OK].
The route is recalculated, and the Route con-
firmation screen appears.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if
“On” is selected.
<IRB1021-A>21
Renewed points through
this upgrade
CAUTION
If the time difference is not set correctly, the na-
vigation system cannot consider traffic regula-
tions correctly. Set the time difference correctly
(For details, refer to the Operation Manual of
your navigation system.)
shows for routes that contain streets or bridges
that are subject to traffic regulations during a certain
time when the setting
“Time restrictions” is “On”.
2D Twin Map View and 3D
Twin Map View
Either
“2D Twin Map View” or “3D Twin
Map View ” can directly be selected in “View
Mode Selection ” screen.
1 Press the MAP button to display a map
of the area around your current position.
2 Press the MAP button again.
3 Touch the mode name to select the
mode you want to display.
2D Twin Map View
The 2D map appears on the left screen.
3D Twin Map View
The 3D map appears on the left screen.
p Touching anywhere on the map changes
the map to the Scroll mode.
Address Book Icon
You can select whether to display the icons for
the entries of
“Address Book” on the map.
p When you select “Address Book Icon Dis-
play ” in “Short-Cut Selection”, you can
switch this setting with the shortcut menu.
p Settings marked with an asterisk (*) show
that these are default or factory settings.
1 Touch the key in the following order in
the navigation menu.
[
Map] d [Displayed Info]
2 Touch [Address Book Icon].
Each time you touch the key changes that set-
ting.
! On*:
Displays the icon on the map.
! Off:
Hides the icon from the map.
<IRB1021-A>22
p Even if “Address Book Icon” is set to
“Off”, the alarm sounds when you ap-
proach the registered location and the
set image pops up. To turn off the sound
output and image pop up, select
“No Sound” and “No Picture” for the
entry.
p If you set (dot), the registered name
of that entry can be displayed on the
map. The registered name does not ap-
pear if
“Address Book Icon” is set to
“Off”.
3D Landmark
You can select whether to display the 3D land-
mark on the map.
p 3D landmark only appears when the view
mode is
“3D Twin Map View” and the
map scale is set to 0.25 mile (200 m) or
lower.
p Settings marked with an asterisk (*) show
that these are default or factory settings.
1 Touch the key in the following order in
the navigation menu.
[
Map] d [Displayed Info]
2 Touch [3D Landmark].
Each time you touch the key changes that set-
ting.
! On*:
Displays the 3D landmark on the map.
! Off:
Hides the 3D landmark on the map.
Traffic event icon and line
p Middle-sized icon is displayed on the map
scale between 1 mile to 2.5 miles (2 km to
5 km).
p The traffic-related items can be shown on
the detailed city map.
Browsing the XM special
contents
The following features have been modified to
enhance ease of operation.
Storing browsable information
XM special contents can be stored as “My Fa-
vorites ” so that it can be accessed without
searching every time an update is needed.
p The displayed items depend on the infor-
mation that is sent from each station.
p “My Favorites” can store up to 50 items.
1 Touch [Information] in the navigation
menu, then touch [Set My Favorites].
The screen will display a list of categories. The
information appearing on screen is automati-
cally updated at regular intervals.
2 Touch a category you want to browse
from the list.
<IRB1021-A>23
3 Touch an item you wish to store.
If an item is divided into more detail cate-
gories, select the one from the list to narrow
down the category. After narrowing down, the
message confirming whether or not to register
the item will appear.
4 Touch [OK].
If the storing step is successful, the confirma-
tion screen will appear.
Touch [
OK] to complete the storing and return
to the previous screen.
Displaying favorite browsable
Information
You can check and delete the browsable infor-
mation you registered.
1 Store the desired item (topic).
= For details, refer to Storing browsable infor-
mation.
2 Touch [Information] in the navigation
menu, and then touch [My Favorites].
A list of registered items (topics) appears on
the screen.
3 Touch an item to display the contents.
The texts appear on each items show the pro-
cess of storing in a hierarchical way.
Hands-free phoning
Device name
The default device name displayed on the cel-
lular phone changes
“PIONEER NAVI” to
“PIONEER HDD NAVI”. (If you already con-
nected the Bluetooth unit, the name already
set remains. If you restore the default setting,
the device name becomes
“PIONEER HDD
NAVI ”.)
The display of an unknown user ’s call
Depending on the caller ID service, the phone
number of the received call may not be dis-
played. [
Unknown] appears instead in that
case.
Editing the entry in “Phone Book”
You can edit [ Pronunciation] to be used for
voice recognition along with [ Name], [Phone
#], or [Picture].
<IRB1021-A>24