Panasonic BT-LH2600W - Manual (Page 22)

22
This function is not available in split screen display of the TWO WINDOW function. (CROSS HATCH is not
affected.)
Underlined values indicate factory defaults.
*1 This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2 These settings are disabled when the GPI function (
page 48) is used to control the marker setting.
They are also disabled in split screen mode.
*3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4 TYPE1 and TYPE2 area marker size depends on the “MARKER TYPE” setting (
page 23).
MARKER
Sub menu Setting Description
MARKER OFF
*1
ON
Turns the MARKER setting on and off.
16:9
*2*3*4 OFF
4:3
13:9
14:9
CNSCO
VISTA
95%
93%
90%
88%
80%
USER 85% Selects/displays the 16:9 marker type.
<OFF>
No marker display
<4:3> 4:3 marker <13:9> 13:9 marker
<14:9> 14:9 marker <CNSCO> CNSCO marker
<VISTA> VISTA marker <95%> 95% area marker
<90%> 90% area marker <80%> 80% area marker
<93%> 93.1% area marker (TYPE1)
93% area marker (TYPE2)
<88%> 89.5% area marker (TYPE1)
88% area marker (TYPE2)
<USER> This area marker can be varied in 1% increments in the range
between 80% to 95%. However, an 88% value for a TYPE1
MARKER TYPE indicates an area marker whose height is 89% of
available screen height in the selected aspect ratio.
(The factory default is 85%.)
4:3
*2*4 OFF
95%
93%
90%
88%
80%
USER 85% Selects/displays the 4:3 marker type.
<OFF>
No marker display
<95%> 95% area marker <93%> 93% area marker
<90%> 90% area marker <80%> 80% area marker
<88%> 89% area marker (TYPE1)
88% area marker (TYPE2)
<USER> This area marker can be varied in 1% increments in the range
between 80% to 95%. Values of 93% and 88% for TYPE1
MARKER TYPE indicate area markers whose height is 93.1% and
89.5%, respectively, of available screen height in the selected
aspect ratio.
(The factory default is 85%.)
BACK
*2 NORMAL
HALF
BLACK Selects the background brightness around the marker.
<NORMAL>
Normal background
<HALF> 50% background brightness
<BLACK> 0% background brightness (black)
CENTER
*2 OFF
ON Displays/turns off the center marker.
<OFF>
Turns the display off
<ON> Turns the display on
Main Menu
(continued)